Polyethylene Plastic Cone Bottom Tanks with Steel Stands to 11,000 Gallons

Plastic Poly Tanks American Process Technology by Alltanks,LLC. Home

Polyethylene Plastic Cone Bottom Tanks with Polyethylene and Steel Stands to 11,500 Gallons.

Cone Bottom Tanks are manufactured from linear polyethylene in one piece, seamless construction this tank series is designed for either indoor or outdoor use. Cone bottoms provide for quick and complete drainage. Polyethylene Stands through 3000 gallons, Carbon steel supports stands up through 11,500 gallons.

Two styles to choose from:

JC – Commercial Series - Maximum specific gravity of 1.5 at 73° F

JA –Industrial Series - Maximum specific gravity of 1.9 at 73° F

Molded in calibrations
Molded in tie down slots
30° cone angle

Capacity (GAL)	Size Dia. X Ht. (IN.)	Manway (IN.)	JC Tank Part #	JA Tank Part #	JK Stand Part #	JH Stand Part #**
1500	86 x 84	16	TC8648JC	TC8684JA	TC8648JK	TC8684JH
1650	95 x 77	16	TN9577JC	TN9577JA	TN9577JK	TN9577JH
2500	95 x 105	16	TN2500JC	TN2500JA	TN2500JK	TN2500JH
2650	86 x 132	16	TC2650JC	TC2650JA	TC2650JK	TC2650JH
5500	119 x 146	16	TN5500JC	TN5500JA	TN5500JK	TN5500JH
7500	141 x 148	16	TN7500JC	TN7500JA	TN7500JK	TN7500JH
11,500	141 x 206	16	TN11500JC	TN11500JA	TN11500JK	TN11500JK

** JH Stand must be used when seismic restraints are required.

NOTE: JK Stand adds approximately 12" to overall height. JH Stand adds approximately 16" to overall height.

Please contact Art Snow for additional information at phone - 281-825 4055 Sales Email Address

Hit Counter